Pair of Underwater Hockey blades 500 mm length S glass fiber
Our blades are specially designed to improve propulsion during the action phases of underwater hockey. The length of the 500 series allows to reach high speeds. The blades have a specific composite structure that supports torsion and flexion in all directions while maintaining maximum thrust. They are fully protected and approved for competition. T-profiles on the leading edges to ensure good guidance Water droplet profiles on the trailing edge for protection. The S-glass blade gives you 4-5% more propulsion than E-glass. It's the most torsion-resistant composite in our line. You'll take your progress to the next level. They can be fitted with Beuchat, Seac, Mares, Pathos and Imersion footpockets.
This blade will suit players who need to repeat long accelerations. It is slower to activate than the 450 series, but allows for greater top speed. To choose the right stiffness, it is important to take into account your body size and your level of practice. The hardness gives more power but requires more effort, with the repetition of the efforts, the muscles are very solicited. To help you, use our 'which model for me?' selector. The most experienced players can add 1 level to the recommended stiffness index. Blade breakage can occur if the blade is stuck (cannot bend) on the edge or bottom of the pool. The push-off must be done on the foot, not on the blade. Repeated push-offs on the blade will create micro-traumas on the fibers that are invisible to the naked eye and one day, while the player is bladening quietly, the blade breaks.
PRECAUTIONS FOR USE :
Your fibreglass or carbon blade can break :
- If the fin is stuck (the end of the fin is stuck, all the weight is on the blade and it cannot bend) => Do not push off with the blade on the bottom, the side of the pool or on the bottom of the water
- If you jump into the water with the blade parallel to the water.
- 500 SERIES
- Pair of blades
- Area cm2
- Glass fiber